HS650SS
Chromium-Carbide Overlay Plate
HS650SS is a unique abrasion resistant chromium-carbide overlay on a stainless steel base plate. It is designed for areas with moderate impact, severe abrasion, and high alkali/acidic environments. This plate can be cut, formed, or rolled. Our unique overlaying process produces a plate with a surface that is harder, tougher, and more wear resistant than plate made by any other process.
HS650SS is available in thicknesses from 3/8” to 1”.
HS650SS must be cut by plasma or abrasive water jet.
| Chemistry |
Percent (%) |
| C |
5.27 |
| Mn |
2.10 |
| P |
0.022 |
| S |
0.016 |
| Si |
0.50 |
| Cr |
26.1/30.0 |
Mechanical Properties:
| Hardness |
58 to 62 Rockwell C
|
Service Temperature
|
1000 degrees (F) |
Welding Procedures:
HS650SS is normally supplied with plasma cut edges and can be welded in place to carbon steel structures with a 300 series stainless rod or wire. No preheating is required. It may be necessary to hardface over the weld with HS101HC wire for added protection.
Standard Sizes:
Standard plate size is 60” X 120”. HS650SS can be cut to your specific needs. HS650SS is available in single, double and triple pass applications in special thicknesses or on special bases upon request.
Standard thicknesses are:
| |
Nominal Thickness |
Overlay Thickness |
Base Plate Thickness |
| 3/16 on 3/16 |
3/8" |
3/16" |
3/16" |
| 1/4 on 1/4 |
1/2" |
1/4" |
1/4" |
| 3/8 on 3/8 |
3/4" |
3/8" |
3/8" |
| 1/2 on 1/2 |
1" |
1/2" |
1/2" |
Suggested Uses for HS650SS Wear Plate:
|
Acidic Liquid Material Handling Components
|
Bins & Hoppers
|
|
|
Blades
|
Blow Tank Plates
|
Blast Furnace Handling Equpiment
|
|
Buckets & Components
|
Bucket Lips
|
Chipper Hoods & Components
|
|
Chip Silo Components
|
Chutes
|
Conveyors & Liners
|
|
Crusher Components
|
Cyclones
|
Dozer Blad Liners
|
|
Drag Conveyors
|
Drums & Sprockets
|
Debarking Drum Components
|
|
Dust Collector Systems
|
Flights
|
Fan Blades & Housings
|
|
Flatback Elbows
|
Flow Baths
|
Flume Liners
|
|
Hammer Mill Side Liners
|
Heel Pads
|
Haul Truck Bed Liners
|
|
Hooks
|
Impact Plates
|
Hot & Cold Strip Mill Guides
|
|
Liner Plates
|
Log Decks
|
Mine Cars & Equipment
|
|
Sand Systems
|
Scraper Blades
|
Scrap Handling Equipment
|
|
Screens
|
Shakeout Machines
|
Shot Blast Equipment
|
|
Skip Cars
|
Sprockets
|
Washers
|
|
Wash Tanks
|
Wear Plates
|
|